Tungsten Carbide Valve Sleeves and Bushings for Flow Control
In logistics transport pipelines, valve seals are susceptible to wear caused by sliding friction from other components, which can exacerbate valve failure. As a result, wear resistance has become an important performance indicator for valves in harsh conditions such as powder transport. spp Carbide has been working in the fluid transport field for 30 years and we are committed to solving the long-term stable production needs of fluid control systems such as coal chemical slurry and oil & gas. Monolithic sintered tungsten carbide carbide is used for sealing parts and is more suitable for hard sealing valve balls for flaps and seats, spools and sleeves, stems and pins, etc.
SPP carbide specialises in the production of wear resistant valve seals for use in harsh operating conditions, thus providing valve life and range. The main applications and types of valves include regulating valves, blackwater valves, slag locking valves, pressure reducing and noise reducing valves etc. The performance indicators of the valves are guaranteed to meet the needs of fluid control.
Typical examples of tungsten carbide flow control elements:
Labyrinth bushings, valve bushings
Ball cages, valve cages, etc.
Valve balls and seats
Valve sprue, valve flap, valve plate, etc.
Homogeniser components
Nozzles and vortex chambers
Centrifugal pump components
Throttle valve assemblies and valve cages
Control valve components
Gate valve components
Mechanical seal components
Compressor components
Centrifuge tiles
SPP Carbide is committed to solving high performance research and development for wear resistant parts, we support not only tungsten carbide, cemented carbide but also technical ceramics, sapphire and other crystalline materials to achieve better wear resistance and hardness performance.
Tungsten carbide valve sleeves and bushings for oil and gas flow control components.
Representative Products:
Chokes and valves trim parts
Pumps seal rings
Labyrinth product series
Tungsten carbide spool
Tungsten Carbide Valve Sleeve
Tungsten Carbide Valve Wear Parts
Tungsten carbide valve balls and seats
Tungsten Carbide Stem
Tungsten carbide valve pins etc.
Drill bit nozzles, inserts, cutters
MWD parts, downhole tool components
TC bearings, PDC thrust bearings
Downhole flow control components
Artificial lift pumps components
Super hard product series
Manufacture of flow control components for the oil and gas sector from drawings
SPP Carbide's fluid handling and flow control products include
Homogenizer assemblies
Nozzles and vortex chambers
Centrifugal pump assemblies
Throttle assemblies and valve cages
Control valve assemblies
Gate valve assemblies
Mechanical seal assemblies
Compressor components
Centrifuge tiles
Industries served by SPP Carbide fluid handling and flow control products include
Food processing
Dairy products
Beverage Processing
Chemical Processing
Marine Services
Oil and gas production
Energy exploration
Environmental services
Related products
Tungsten Carbide Wear Parts for Oil & Natural Gas
Oil and Gas
For over 30 years, SPP CARBIDE has been providing solutions for the oil and gas industry. We offer a wide range of products, from the smallest measuring inserts for drilling to complex and fully finished flow control assemblies manufactured and assembled from a variety of materials. Our fully integrated manufacturing organization allows us to control every step of the process from raw material to finished product. Providing our customers with the best combination of performance, total cost of ownership and availability.SPP CARBIDE produces tungsten carbide wear parts, hardened steel tooling, and technical ceramic parts for oil and gas applications, mainly in the drilling, production and wireline sectors.
ESP Components & Tungsten Carbide Sleeves and Bushings
Bushing & Sleeve of ESPThe cemented carbide bushing & sleeve will mainly be used on electric submersible pump(ESP) in oil field. There are kinds of sleeves, such as normal cylindrical axle sleeve, cylindrical axle sleeve with slot, axle sleeve with convex stage, axle sleeve with slot and convex stage, non-standard axle sleeve etc. There is a big choice of sizes and types of products. We can also recommend, design, develop, produce and supply the products according to the drawings and requirements of customers. Disc Stack and Valve Cage for Fluid Control
Tungsten carbide tools for oil, gas and petrochemical applications:
Tungsten carbide has been used in flow control technology for many years. The reason: onshore as well as offshore, we often encounter extreme conditions. Moisture, sand and abrasive solids can cause tremendous wear - not only downstream, but in all phases of upstream processing operations after extraction. For many years, SPP CARBIDE has been a leader in offshore technology, exploration technology, mining technology, fluid control technology, hydraulics and pump body technology, drilling technology, power generation and environmental protection, where tungsten carbide and technical ceramics are becoming increasingly important.products:
Valve inserts, radial bearing sleeves, pistons, complex construction parts for extreme applicationstypical applications:
Drill drives, choke valves, control valves, shut-off valves, processing systems, onshore, offshoreCemented Carbide Valve Balls
Ball
As the core component of the ball valve, the ball plays a decisive role in the quality and stability of the ball valve and its service life, our company has been supplying ball products for more than ten years to ball valve manufacturers, and the stable quality has been widely praised.Technical parameters:
Specification: diameter 1/4″~8″
Structure: L-type, T-type, V-type, X-type, hollow sphere, etc.
Pressure: Class150-900
Base material: tungsten carbide, technical ceramics, A105, F304, F316, F316L, etc.
Surface treatment: Electroless nickel plating (ENP), tungsten carbide (TCC), Stearic carbide (STL), Inconel, etc.
In addition to standard parts we also manufacture valve balls according to customer drawings.
![](https://www.spp-industry.com/wp-content/uploads/2023/04/1681724318-2.png)
SPP Industry Ltd.
In the 1990s, SPP Industry Ltd was one of the first manufacturers to establish CNC machining in China. The company has now established five major machine parks in China, with significant achievements in the areas of 5-axis machining, precision grinding & honing, gear machining, large parts machining, custom tungsten carbide and new material development respectively.